Electronic Ballast for D (T4/Ø 13 mm) Fluorescent Lamp
Product Highlights
l Alternative design to magnetic ballast
l Reduced power losses, decrease self-heating of the ballast
l Flicker-free ignition
l No stroboscopic effects and flicker-free during operation
l No irritating noise
l End-of-life Protection
l Automatic restart after lamp replacement
l Automatic shutdown in case of lamp failure
l Active Power Factor Correction
l Radio Disturbances shall comply with EN 55015
l Harmonic Current Emissions shall comply with EN 61000-3-2
l EMC Immunity shall comply with EN 61547
l Performance shall comply with EN 60929 and EN 60925
l Safety shall comply with EN 61347
Technical Data
| Lamp |
see table |
| Power |
see table |
| Rated voltage |
220 - 240 V~ |
| Mains frequency |
50...60 Hz |
| Ambient temperature |
-20℃ ~ 50℃ |
| Power factor |
0.55 |
| Average service life |
10000~15000h |
| Test mark |
CE |
Additional Product Highlights
Connection diagrams
NOTE: All wiring to the connectors marked with a black dot, ● (hot wires) should be as short as possible.
Due to our continuing program of product development data subject to change without notice.
|
Lamp
type
|
power
W
|
No. of lamps
|
Ballast model NO.
|
EEI
|
Dimensions
NO.
|
Wiring
NO.
|
Weight
(g)
|
Input
power
(W)
|
Input
current
(A)
|
|
T4/Ø13mm 1616 mm
|
16
|
1
|
1× 16W
|
A2
|
1
|
1
|
52
|
16
|
0.125
|
|
21
|
1
|
1× 21W
|
A2
|
1
|
1
|
52
|
21
|
0.165
|
